Thiết bị kiểm tra bảo vệ nhiệt bức xạ nhiệt GT-C96

Lượt xem:
4000
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

- Thiết bị này được sử dụng để thử nghiệm khả năng chịu nhiệt cho vải một lớp hoặc nhiều lớp ở nhiệt độ cao. Nó cũng có thể được sử dụng để xác định tính chất cách nhiệt của các tấm chống cháy khác.
- Bức xạ nhiệt là một chỉ số hiệu suất quan trọng của các sản phẩm chống cháy. Việc xác định chính xác các tính chất bảo vệ của nó rất quan trọng để lựa chọn vật liệu, nghiên cứu và phát triển các sản phẩm mới, cải thiện các kỹ thuật xử lý.
- Tiêu chuẩn kiểm tra hiệu suất bảo vệ nhiệt bức xạ: ISO 6942-2002, EN366

Dệt May

Feature

Thermal protection performance tester According to ISO 6942-2002 (EN366) standard, there are two testing method.
Method A: Made the sample absorb a certain amount of heat radiation in order to reproduce the material the inclement conditions, recording changes in appearance.
Method B: Put calorimeter at back of the specimen, heat conduction from samples back, recording temperature trends over time in order to determine the level of heat transfer radiation.

Key Specifications

Model	GT-C96
Heating Power of Silicon Carbide Rod	6.5kW/220V, Heating Section: Length 178 mm, Diameter 8mm
Density of Heat Flow	10kW/m2～80 kW/m2 Adjustable
Thermal Radiation Source Temperature Control	Room Temperature～1200℃±5℃ (Display Accuracy is 1℃)
Thermal Radiation Source Temperature Sensor	Thermocouple (0～1600℃)
Thermal Radiation Temperature Controller	With PID Intelligent Controller
Calorimeter Hear Capacity	Actual Measurement Value Around 480.937 J/K, Heating Area50×50mm²
Calorimeter Temperature Range	Room Temperature～80℃
Calorimeter Temperature Range	Pt100 Platinum Resistor (-200～450℃)
Power Supply	1∮ AC 220V 50/60Hz

Accessories

Standard accessories	1pc	Desktop Computer
	1pc	English Operation Software
	1pc	Power line
Optional accessories	Optional	Air Compressor

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ