Máy kiểm tra va đập Charpy / IZOD

Máy kiểm tra va đập Charpy / IZOD

  • 6118
  • Bayerteq - Đức
  • Liên hệ
Máy kiểm tra va đập con lắc là một thiết bị được sử dụng để thực hiện thử nghiệm va đập trên các vật liệu nhựa nhiệt dẻo nhằm xác định đặc tính giòn của chúng dưới tác động của ứng suất xác định.

**Đặc điểm**:
1) Màn hình cảm ứng, các tham số thử nghiệm có thể được thiết lập qua màn hình cảm ứng; với chức năng hiệu chuẩn tự động năng lượng mất mát. Độ chính xác cao, ổn định tuyệt vời và dễ vận hành giúp máy đạt chứng nhận CE và có thể được bán trên toàn thế giới.
2) Có thể cắm USB để chuyển kết quả thử nghiệm sang máy tính.
3) Tính toán tự động năng lượng va đập và sức mạnh va đập, kết quả thử nghiệm có thể hiển thị và in ra.
4) Thiết bị thu thập góc quang điện đảm bảo độ chính xác của kết quả thử nghiệm, góc hiện tại của con lắc có thể được hiển thị.

Thông số kỹ thuật:

  • Phương pháp điều khiển và hiển thị: Màn hình cảm ứng
  • Năng lượng va đập: 3.5 m/s
  • Mức năng lượng va đập: 1.0 J, 2.75 J, 5.5 J
  • Góc xuất phát: 1500
  • Khoảng cách giữa trục và tâm mẫu: 335 mm
  • Độ chính xác: ±0.1%
  • Độ phân giải hiển thị: 0.001J
  • Vị trí của cạnh va đập trên bề mặt hỗ trợ: 22.0mm±0.2mm
  • Bán kính góc của cạnh va đập: R=0.8 mm±0.2 mm
  • Mất năng lượng: 1.0 J—2%; 2.75 J—1%; 5.5 J—0.5%
  • Loại mẫu: 80mm, 10mm, 4mm
  • Kích thước: Dài x Rộng x Cao = (830 x 300 x 890) mm
  • Cung cấp điện: (220-15%~220+10%)VAC 50Hz 0.1kW, 1 pha và 3 dây

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.
Liên hệ

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required
Liên hệ

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.
Liên hệ

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.
Liên hệ

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.
Liên hệ

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.
Liên hệ

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.
Liên hệ