Máy kiểm tra tay vịn và tựa lưng ghế GT-LB02 Arm Rest and Seat Back Testing Machine

Lượt xem:
5952
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra tay vịn và tựa lưng ghế được trang bị năm bộ truyền động, có thể điều khiển riêng lẻ để lặp lại quá trình kiểm tra các điểm trên ghế.

Arm Rest and Seat Back Testing Machine GT-LB02

Product Introduction

Application:

The tester tests the strength and durability of the arm, seats, back or other parts by simulating the loading of the seats during routine use. The machine is equipped with five drive units, and can be individually

controlled to repeatedly load the test points of the chair. Through different parameter settings, the machine can complete the following types of test functions on the seat:

1. Armrests Vertical static load test;

2. 10⁰angle handrail durability test;

3. Seat front edge static load and durability tests;

4. Vertical static load test on backrests;

5. Leg Strength Test - Front and Side Application;

6. WordPad vertical static load and durability test.

7. Arm rest sideways static load test

8. Backrest Strength Test- Static

9.Armrest upward static load test (need to tie the weight test)

Feature:

1. Chair Seat Arm and Back Testing Machine main structure of the machine is made of aluminum, beautiful and easy to maintain.

2. Servo motor and air cylinder drive, test load control more accurate, and the noise is even smaller.

3. PLC touch screen control, operation more convenient.

Standards:

EN 1728-2012 Section 6.5,6.6, 6.10, 6.11, 6.12, 6.13, 6.14 ,6.15 ,6.16, 6.18, 6.20, 6.22, 7.4, 7.5, 7.6, 7.7, 7.10 , 7.12

EN1335-3 -2009 Section 7.2.1, 7.2.3, 7.2.4, 7.2.5, 7.3.2,

EN 1729-2-2012 Section 5.3.4, 5.3.5, 5.3.12

EN581-2-2015（corresponding with EN1728-2012),

ISO 7173-1989 Section 7.3, 7.4

GB/T 10357.3 Section 4.3.3, 4.4, 4.5, 4.6, 4.9,

QB/T 2280-2007 Section 6.6.5, 6.6.6, 6.6.13.2

BIFMA X5.1 - 2017 Section 5, 6, 9, 10.4,13, 14,15, 20, 22, 23, 24

EN 16139-2013 （corresponding with EN1728-2012)

BS5459-2-2000 Section A5.5,A7.2, A7.3

Key Specifications

Model	GT-LB02
Load capacity	2000N
Force device stroke	0-80cm
Stroke range	60-160cm
Load Angle	0~10⁰（The angle to the vertical is adjustable）
Test speed	5~25 times/min
Testing time	0-99999 ( can be adjustment)
Control method	PLC control
Dimension(WxDxH)	150×150×190cm
Weight	600kg
Power	1∮, AC 220V 50Hz

Accessories

Standard Accessories	2pcs	GT-LB01-3 Smaller seat loading pad
	2pcs	GT-LB01-5 Local loading pad
	2pcs	GT-LB01-8 203mm loading pad
	2pcs	Arm rest loading pad
	1pc	GT-LB01-10B BIFMA Cumulative Weight
	1pc	Seat back fixture
	1pc	BIFMA arm rest pull-down loading pad
	1pc	Stationary fixture
	2pcs	Stops

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ