Máy đo độ xoắn của sợi đơn và sợi đôi Twist-tester 17

Lượt xem:
5161
Thương hiệu:
Châu Âu
Giá:
Liên hệ

- Máy kiểm tra độ xoắn Branca 17 cho phép phân tích số vòng xoắn theo hướng S hoặc Z của sợi đơn và sợi xoắn
- Có thể lựa chọn hướng xoắn theo hướng SZS hoặc ZSZ bằng công tắc chuyển đổi để cài đặt hướng quay của động cơ
- Đầu thử nghiệm tự động với cảm biến tiệm cận để dừng hoạt động của động cơ trong quá trình thử nghiệm tháo xoắn-xoắn lại theo phương pháp ASTM 1423 cho sợi đơn.
- Tiêu chuẩn : ISO 2061 - ASTM D 1422 - ASTM D1423 - UNI EN ISO 2061 - IWTO 25-70/E - DIN 53832/1 - BS 2085

Dệt May

Automatic test end with proximity sensor to stop motor operation during untwist-retwist test method ASTM 1423 for single yarns.

The reading of twisting no. in S or Z direction through the counters helps the operator to have an instant reading of twisting no. of the sample under examination.

twist-tester-counters

The left side dial counter shows the thousands and hundreds of twists, while the right one the tenths and units of twists.

The control panel of the tester allows the user to switch twist direction in S or Z, to select the test method in Untwist-Retwist or Direct counting and to adjust motor speed with external potentiometer during the test running.

On the left side the elongation movable equipment it is included the elongation scale, equipped with index lancet, while the pretension weights can be loaded to the pretension tray according to the yarn count of the sample under examination.

The elongation scale shows clearly the behaviour of yarns during untwist, and it can be analysed the yarn maximum elongation thanks to its double measuring scale expressed in millimetres and inches.

This elongation movable equipment can be shifted transversally by the operator along instrument basement and fixed at the desired length always expressed in millimetres or inches, e.g. 0 - 50 cm for the standard fixing the desired distance length between the two clamps.

TEST METHODS:

Untwist-retwist according to UNI ASTM D 1423
Direct counting according to UNI EN ISO 2061, ASTM D 1423

INCLUDED:

Separation needle, to separate the plied and multi-plied yarns during the untwist;
Magnifying glass, to check the yarn under examination during the untwist;

Standard sample length:
- 0…50 cm
Extended model with sample lengths:
- 0…1 m
- 0…2 m

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ