MÁY ĐO ĐỘ MỊN SỢI FFM:ELE2

Lượt xem:
4119
Thương hiệu:
Wira Instrumentation
Giá:
Liên hệ

FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE
The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier.

An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.

Dệt May

Calibration

Each meter is calibrated using standard dry-combed tops available from Interwoollabs.

Calibration for dry combed tops is carried out in accordance with method 2 in test method IWTO-6-13. For the testing of loose wool core samples, the meter is calibrated using short randomised open fibre, prepared from standard tops following the procedure in test method IWTO-28-13.

Special calibrations are available for the testing of fibres other than wool e.g. glass fibres, mineral fibres, cotton, cashmere, mohair etc. Optional temperature and humidity probe allows automatic recording of lab conditions.

Test Method

A 2.5g sample of fibres is placed in the sample chamber. Air is drawn through the sample by a vacuum pump supplied with the instrument. Electronic sensors measure both the airflow and the air pressure, from which the fibre diameter is automatically calculated.

Key Features

✔ Colour Touch Screen

✔ Automatic calculation of values

✔ Direct reading of results

✔ Complies with latest IWTO recommendations

✔ On-board processor

✔ Ergonomically designed

✔ Electronic flow and pressure sensors

✔ RS232 output to PC
✔ Optional software to capture results and store as spreadsheet

✔ Full calibrated service available for existing instruments

Conforms to: BS ISO 1136:2015, IWTO-6-2013,IWTO-28-2013

Dimensions: 450mm (W), 410mm(D), 235mm (H)

Power Consumption: 750 W Options: PC Windows Software.

Order Code: FFM:ELE2

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ

Chi tiêt Xem nhanh

HT-Steamer H-TS-3

Hãng sx: RAPID (Labortex)

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature, humidity, dwelling time.

Liên hệ

Chi tiêt Xem nhanh

Máy rửa liên tục LAB WASHER

Hãng sx: RAPID (Labortex)

LAB WASHER phòng thí nghiệm, chủ yếu là 4 bể là thiết kế chính, có thể được sử dụng trong hoạt động của một máy hoặc kết hợp máy cán, hút, hấp và nhuộm liên tục PS-J hoặc PS-JS.

Liên hệ

Chi tiêt Xem nhanh

PAD STEAM processes with saturated steam PS-J

Hãng sx: RAPID (Labortex)

Suitable for carrying out all PAD STEAM processes with saturated steam, offers the shortest distance between padding mangle and steaming chamber.

Liên hệ

Chi tiêt Xem nhanh

PAD STEAM processes with saturated steam PS-JS

Hãng sx: RAPID (Labortex)

Suitable for carrying out all PAD STEAM processes with saturated steam, offers the shortest distance between padding mangle and steaming chamber.

Liên hệ

Chi tiêt Xem nhanh

MÁY NHUỘM LIÊN TỤC PHÒNG THÍ NGHIỆM PT-J

Hãng sx: RAPID (Labortex)

Dòng nhiệt kế phòng thí nghiệm với vùng hồng ngoại thích hợp để tạo công thức thuốc nhuộm và cho công việc nghiên cứu.

Liên hệ

Chi tiêt Xem nhanh

MÁY NHUỘM LIÊN TỤC PHÒNG THÍ NGHIỆM PT-V

Hãng sx: RAPID (Labortex)

Máy nhiệt luyện phòng thí nghiệm model PT-V là máy nhuộm liên tục phòng thí nghiệm loại vải Guide Cloth. Thích hợp cho vải chạy dài.

Liên hệ

Chi tiêt Xem nhanh

Horizontal type model P-BO

Hãng sx: RAPID (Labortex)

Horizontal type model P-BO is suitable for all dyeing, printing, finishing, padding processes. Floor model, basic design as vertical type model P-AO.

Liên hệ

Chi tiêt Xem nhanh

P-TENTER

Hãng sx: RAPID (Labortex)

The basic principle is to have a continuous type laboratory machine which exactly has the same characteristics like a production STENTER machine to replicate testing results, suitable for drying, thermosoling and curing samples. P-TENTER consists of the following parts: - 1 pair of vertical type pneumatic mangle, model P-A1 - 1 hot-air dryer with pin-chain transportation system, model MINI-TENTER - 1 fabric pin-up device

Liên hệ