Máy đo độ ẫm mùn cưa, gỗ dăm AD22-CMS22 Moisture measuring system

Lượt xem:
5582
Thương hiệu:
Doser Messtechnik - Đức
Giá:
Liên hệ

Ứng dụng : dùng cho dăm gỗ, viên gỗ, mùn cưa, ...

AD22
Màn hình hiển thị và đơn vị điều khiển cho các cảm biến khác nhau

Thông số kỹ thuật:

Phạm vi đo (Measuring Range): 0 - 100% (có thể điều chỉnh)
Độ phân giải (Resolution): 0,1%
Tốc độ đo (Measuring Rate): 1 - 10 phép đo mỗi giây (có thể điều chỉnh)
Lưu trữ (Storage): 10 nhóm, mỗi nhóm chứa 100 giá trị đo
Kích thước (Dimension): 125 x 85 x 45 mm
Trọng lượng (Weight): Khoảng 240 g
Giao diện (Interface): USB
Phần mềm (Software): DOSOFT
Pin (Batteries): Pin kiềm loại mignon (AA), 2 viên

CMS22

Cảm biến thanh cho mùn cưa, viên gỗ, bụi gỗ, ngũ cốc và các hạt khác

Thông số kỹ thuật:

Kích thước (Dimension): Ø22 x 200 mm (chiều dài có thể điều chỉnh qua các ống mở rộng tùy chọn)
Phạm vi đo (Measuring Range): Khoảng 10 cm xung quanh cảm biến
Trọng lượng (Weight): Khoảng 250 g
Nguyên lý đo (Measuring Principle): Cảm biến điện dung (Capacitive)
Tín hiệu đầu ra (Output Signal): 0 - 5 V

Bộ AD22-CMS22:

Đơn vị hiển thị (Display Unit): AD22 và cảm biến CMS22, bao gồm 3 ống mở rộng Ø18 x 290mm
Được cung cấp trong hộp nhựa chắc chắn
Đường cong hiệu chuẩn cố định cho các vật liệu khác nhau đã được lập trình sẵn
Có thể lưu trữ thêm tới 10 đường cong hiệu chuẩn tùy chỉnh cho khách hàng

Tùy chọn: Mô-đun kiểm tra PE22 cho phép hiệu chuẩn định kỳ.

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ