STADIVARI Máy nhiễu xạ X dọc/ngang linh hoạt dành cho tinh thể/bột, chùm tia kép, X-AREA

Lượt xem:
333
Thương hiệu:
Advanced measurement instruments (AMI) - Mỹ
Giá:
Liên hệ

● Goniometer linh hoạt (giá đỡ Eulerian và nhiều thiết lập chi cố định khác nhau)

● Vùng nhiễu xạ có bán kính nhỏ hơn 0,005 mm

● Đầu dò pixel lai siêu nhanh (phạm vi đầu dò đầy đủ của EIGER và PILATUS)

Introduction

Being conceptualized to offer a wide scope of applications, the STOE STADIVARI can be set up vertically as well as horizontally. It can be used for single crystal as well as powder diffraction, with the open Eulerian cradle offering enough space for high pressure cells, high- or low-temperature devices or other accessories.
In the dual beam setup, all combinations of tubes and microfocus BDS are possible: two sealed tubes, one sealed tube and one microfocus BDS or two microfocus BDS.
Moreover, the STADIVARI is fully integrated in the well-established STOE X-AREA software package.

Flexible goniometer (Eulerian cradle and various fixed chi setups)
Sphere of confusion of less than 0.005 mm radius
Different source solutions (Standard sealed tubes, Microfocus sources, MetalJet or synchroton beam)
Ultrafast hybrid pixel detector (full EIGER and PILATUS detector range)
Various non-ambient attachments (high and low temperature, high pressure)

Specifications

stadivari freigestellt neu 2 e1690369672566 (1)

Data Sheet
Sphere of confusion	less than 0.005 mm in radius
Goniometer (utilized angular regions)	2θ: 240° / ω: 205° / χ: 90° / φ: 360°
Detector distance	40 – 140 mm (automatically set)
X-ray sources	Standard sealed tubes (Ag, Mo, Cu), Microfocus sources (Ag, Mo, Cu), Excillum MetalJet or synchroton
Dimensions (Including system cabinet, max.)	1680 x 1150 x 1900 mm
Weight (complete system)	760 kg
DETECTOR SPECIFICATIONS	EIGER2 1M CdTe
Sensor technology	Hybrid pixel counting
Sensor material	CdTe
Sensor thickness	750 µm
Pixel size (W x H)	75 µm x 75 µm = 5625 µm²
Number of modules (W x H)	1 x 2 = 2
Pixel array format (W x H)	1028 pixels x 1062 pixels = 1 091 736 pixels
Active area (W x H)	77.1 mm x 79.65 mm = 6141.015 mm²
Dynamic range	32 bit
Maximum count rate	9.8 × 10⁸ photons/s/mm²
Energy range	8 keV to 25 keV
Readout time	continuous readout with 100 ns dead time
Maximum frame rate	100 Hz
Cooling	Water cooled

Doppelaufbau Axo Pilatus 300 CdTe 4 e1683893426279 — The STADIVARI can support one or two X-ray sources of choice and a plethora of accessories without interfering with its sphere of confusion or its collision map.

stadivari 44 scaled e1690370122741 — The eulerian cradle offers highest precision for the goniometer positions even with heavy accessories and at a Χ angle of -90°.

STADIVARI VERTIKAL e1687339835666 — For special applications, e.g., at a Synchrotron, the STADIVARI can be mounted vertically

heatstream 1 e1682319029940 — One of the many accessories for the STADIVARI is the HEATSTREAM. It can be attached in a plug and play fashion and heats up to 1000 K without affecting the detector or other peripheral instruments.

Software & Accessories

X-AREA, our in-house developed single crystal diffraction software, seamlessly integrates instrument control and data treatment, culminating in the creation of the .hkl file. Beyond these core functionalities, it also provides specialized features, such as the ability to effectively handle additional reflections generated by a diamond anvil cell, enhancing its versatility and applicability.

To complement our single crystal diffractometers, we offer an extensive selection of accessories, including the HEATSTREAM, specialized sample holders, and cryo options. These accessories expand the capabilities of the instruments and provide enhanced functionality for a diverse range of experimental needs.

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ