Máy thử độ bền chịu tải ngang của ghế GT-LB12

Máy thử độ bền chịu tải ngang của ghế GT-LB12

  • 252
  • Gester - Trung Quốc
  • Liên hệ
Máy thử độ bền chịu tải ngang của ghế được sử dụng để mô phỏng điều kiện tải trọng của ghế trong sử dụng hàng ngày và kiểm tra độ bền chịu tải tĩnh ngang của tay vịn.
  • Product Detail

Chair Sideways Testing Machine GT-LB12

Product Introduction

Application:

This Chair Testing Machine is used to simulate the loading condition of the chair in daily use, and test the lateral static load strength of the handrail.

The Chair Testing Machine is equipped with two drive devices, and can be individually controlled separately to repeated load for the test point of the seat . Through different parameter settings, can do the test for different seats.

Standards:

EN 1728-2012 Section 6.10, 7.7

EN581-2-2015 (EN1728-2012),

EN1335-3 -2009 Section 7.2.5

EN 1729-2-2012 Section 5.3.5

ISO 7173-1989 Section 7.3,

GB/T 10357.3 -2013 Section 4.5

BIFMA X5.1 - 2011 Section 14

EN 16139-2013 (EN1728-2012)

BS5459-2-2000 Section A7.2

QB/T 2280-2007 Section 6.6.6

 
 
Key Specifications

Model

GT-LB12

Load cell capacity

2000N

Testing time

0-99999 ( can be adjusted)

Control method

PLC touch screen

Power supply

1 phase AC 220V 50/60Hz

150x150x150cm

Dimensions(W x D x H)

150x150x150cm

Weight

300kg

Accessories

Standards accessories

2pc

GT-LB01-5 Local loading pad

1pc

Stationary fixture

Applications Industry 

All kinds of chair products can be tested on the Chair Sideways Testing Machine

Tập tin PDF:

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: Wira Instrumentation

Được thiết kế đặc biệt để kiểm tra số lượng sợi Thiết bị đo chính xác để xác định mật độ tuyến tính của sợi. Cân đếm sợi Wira là thiết bị lý tưởng để kiểm tra phân tích số lượng sợi. Các phép đo có thể xác định mật độ tuyến tính (khối lượng trên chiều dài) của các cuộn sợi và GSM (khối lượng trên mét vuông) của vải. Cân đếm sợi Wira đưa ra kết quả theo hệ thống Tex, dTex và các hệ thống đếm sợi khác như hệ mét (Nm), hệ Anh (Ne), hệ bông Anh (Nec), Denier (Td), v.v.
Liên hệ

Hãng sx: Wira Instrumentation

Đo nhanh độ căng của sợi dọc trong quá trình dệt Máy đo độ căng sợi dọc WTM:003 nhỏ gọn được phát triển để đo lực kéo trong sợi dọc. Lực kết hợp của sợi dọc có chiều rộng 50 mm được đo bằng đầu đo có con lăn 100 mm. Kết quả được hiển thị trên một thiết bị hiển thị riêng. Người vận hành có thể cài đặt lưu trữ các giá trị độ căng AVG, LAST, MIN, MAX, PEAK-MIN, PEAK-MAX trong thời gian đo.
Liên hệ

Hãng sx: Wira Instrumentation

FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier. An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.
Liên hệ

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.
Liên hệ

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required
Liên hệ

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.
Liên hệ

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.
Liên hệ

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.
Liên hệ