Máy kiểm tra hiện tượng mờ sương FT-F1

Lượt xem:
242
Thương hiệu:
Labthink - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra hiện tượng mờ sương FT-F1 được thiết kế chuyên nghiệp để đánh giá đặc tính mờ sương của các thành phần dễ bay hơi trong vật liệu trang trí được sử dụng trong ô tô và máy bay, ví dụ như các sản phẩm nhựa, polyurethane, dệt may, da, chất kết dính, vải không dệt và chất đàn hồi định hình nhiệt ở điều kiện nhiệt độ cao. Nó cũng có thể được sử dụng để kiểm tra hiện tượng mờ sương của đèn pha phóng điện cường độ cao (HID) của ô tô.

Features

Wide range and high precision of temperature control device to support the combinations of non-standard test conditions
6 test stations can perform specimen test or blank test simultaneously
FT-F1 fogging tester ensures accurate and reliable test data through stable running condition

Test Principle

The preconditioned specimen is heated and evaporates in the beaker; the volatile constituents condense on the glass plate or aluminum foil treated in cooling chamber. Take off the glass plate or aluminum foil when the condensation process is finished. The fogging characteristics could be obtained by measuring condensed constituent weight and fogging value on the glass plate or aluminum foil and comparing with the data before condensation process.

Test Standards

This instrument conforms to the multiple international and national standards:
ISO 6452, DIN 75201, SAE J1756, QB/T 2728, BS EN 14288, PV 3920, PV 3015, ES-X83231, NES M0161, D45 1727, GM 9305P, TSM 0503G

Three Test Methods

Gloss Method: the specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value could be obtained by calculating and comparing the gloss values occurred before and after condensation process.
Haze Method: the specimen is heated in the beaker and its volatile constituents are condensed on the cooling glass plate. The fogging value of the specimen could be obtained by calculating and comparing the fogging values occurred before and after condensation process.
Weighing Method: the specimen is heated in the beaker and its volatile constituents are condensed on the cooling aluminum foil. The fogging value - the weight of condensed constituents could be obtained by analyzing the weight changes of aluminum foil occurred before and after condensation process.

Instrument Structure

The instrument mainly consists of constant high-temperature bath, constant low-temperature bath, cooling plate, beaker, glass plate, meter, sample cutter and other accessories, through which it can perform the processes of sampling, heating, condensation and test.

Operation Process

Prepare specimens-----switch on high and low temperature baths-----clean beakers and glass plates------place specimens----place glass plate or aluminum foil-----place cooling chamber-----perform test for a specified period of time----take off glass plate or aluminum foil and place certain time----measure the gloss value, fogging value of glass plate or weight value of aluminum foil------compare the data and obtain test results

Applications

FT-F1 fogging tester is applicable to the determination of:

Basic Applications
Decorating Articles of Cars Test the volatility of car decorating articles, e.g. instrument boards, knobs, seat cushions, floor leather and ceiling materials at high temperature
Plastic Particles Test the volatility of plastic particles at high temperature
Extended Applications
Carpets Test the volatility of carpets at high temperature
Leather Test the volatility of leather at high temperature
Sponge, Rubber and EPE Thermal Insulation Materials Test the volatility of sponge, rubber and EPE thermal insulation materials at high temperature
High Intensity Discharge Lamps For the fogging test of front high intensity discharge lamps of cars
Adhesive Products Test the volatility of adhesive products at high temperature

Technical Specifications

Specifications	FT-F1 Fogging Tester
Temperature Range of High-Temperature Bath	Room temperature ~ 150°C (room temperature ~ 280°C is optional)
Accuracy	±0.1°C (150°C)
Temperature Range of Low-Temperature Bath	0 ~ 100°C
Accuracy	±0.1°C
Size of High-Temperature Bath	670 mm (L) x 490 mm (W) x 540 mm (H)
Size of Low-Temperature Bath	400 mm (L) x 220 mm (W) x 520 mm (H)
Net Weight of High-Temperature Bath	32 kg (except the weight of heat conducting medium)
Net Weight of Low-Temperature Bath	15 kg (except the weight of heat conducting medium)
Power Supply	220VAC 50Hz / 120VAC 60Hz

Configurations

Standard Configurations: Instrument, Constant Temperature Control Device, Gloss Meter, Sample Clamp Ring, Beaker, Fluorine Rubber O-ring, Rubber Fixing Ring, Rectangular Glass Plate, Round Glass Plate, Aluminum Foil, Round Sample Cutter of Aluminum Foil, Lid, Stand of Glass Plate, Round Sample Cutter and Accessory Stand

Optional Parts: Haze Meter, Analytical Balance(0.01mg), Beaker, Fluorine Rubber O-ring, Rectangular Glass Plate, Round Glass Plate, Aluminum Foil, Round Sample Cutter of Aluminum Foil, Stand of Glass Plate, Heating Fluid, DIDP and

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

PAD STEAM processes with saturated steam PS-J

Hãng sx: RAPID (Labortex)

Suitable for carrying out all PAD STEAM processes with saturated steam, offers the shortest distance between padding mangle and steaming chamber.

Liên hệ

Chi tiêt Xem nhanh

PAD STEAM processes with saturated steam PS-JS

Hãng sx: RAPID (Labortex)

Suitable for carrying out all PAD STEAM processes with saturated steam, offers the shortest distance between padding mangle and steaming chamber.

Liên hệ

Chi tiêt Xem nhanh

MÁY NHUỘM LIÊN TỤC PHÒNG THÍ NGHIỆM PT-J

Hãng sx: RAPID (Labortex)

Dòng nhiệt kế phòng thí nghiệm với vùng hồng ngoại thích hợp để tạo công thức thuốc nhuộm và cho công việc nghiên cứu.

Liên hệ

Chi tiêt Xem nhanh

MÁY NHUỘM LIÊN TỤC PHÒNG THÍ NGHIỆM PT-V

Hãng sx: RAPID (Labortex)

Máy nhiệt luyện phòng thí nghiệm model PT-V là máy nhuộm liên tục phòng thí nghiệm loại vải Guide Cloth. Thích hợp cho vải chạy dài.

Liên hệ

Chi tiêt Xem nhanh

Horizontal type model P-BO

Hãng sx: RAPID (Labortex)

Horizontal type model P-BO is suitable for all dyeing, printing, finishing, padding processes. Floor model, basic design as vertical type model P-AO.

Liên hệ

Chi tiêt Xem nhanh

P-TENTER

Hãng sx: RAPID (Labortex)

The basic principle is to have a continuous type laboratory machine which exactly has the same characteristics like a production STENTER machine to replicate testing results, suitable for drying, thermosoling and curing samples. P-TENTER consists of the following parts: - 1 pair of vertical type pneumatic mangle, model P-A1 - 1 hot-air dryer with pin-chain transportation system, model MINI-TENTER - 1 fabric pin-up device

Liên hệ

Chi tiêt Xem nhanh

PMT-350 machine

Hãng sx: RAPID (Labortex)

The basic principle of PMT-350 machine was to have a laboratory machine which has exactly the same possibilities and characteristics like a production STENTER machine. PMT-350 is a continuous operation apparatus suitable for drying, curing, continuous dyeing of sample.

Liên hệ

Chi tiêt Xem nhanh

MSP

Hãng sx: RAPID (Labortex)

Model MSP, hoạt động liên tục để hấp vải in hoặc sau khi xử lý vải nhuộm trong hơi nước bão hòa lên đến 102℃±2℃. * Tất cả đều làm bằng thép không gỉ * Kích thước mẫu: Rộng tối đa 300mm (model MSP-300) Rộng tối đa 600mm (model MSP-600) Không giới hạn chiều dài. * Thời gian lưu trong buồng hơi: 3-18 phút (tốc độ khác theo yêu cầu) * Tùy chọn hơi nước nhiệt độ cao trong buồng bằng bộ điều khiển nhiệt độ và thiết kế gia nhiệt bằng điện.

Liên hệ

Chi tiêt Xem nhanh

Laboratory dosing system ROBOT DOSER

Hãng sx: RAPID (Labortex)

ROBOT DOSER là hệ thống định lượng phòng thí nghiệm thiết kế không ống để có độ chính xác tối ưu trong quá trình chuẩn bị bể nhuộm.

Liên hệ

Chi tiêt Xem nhanh

AUSTOCK PRO

Hãng sx: RAPID (Labortex)

AUSTOCK Pro replaces traditional labor intensive method of preparing stock solution standards. At the time of solution making, there is no need to add a specified amount of dyestuff, AUSTOCK Pro can automatically adjust the total solution volume according to the amount of dye added to achieve the correct concentration. As AUSTOCK PRO is computer controlled, the degree of accuracy achieved is without parallel.

Liên hệ