Máy kiểm tra độ thoáng khí của khẩu trang PN-MBTF

Lượt xem:
180
Thương hiệu:
Pnshar - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra khả năng thoáng khí của khẩu trang PN-MRTF được thiết kế theo tiêu chuẩn GB/T 32610-2016 và được sử dụng để kiểm tra khả năng cản trở khi hít vào và thở ra của khẩu trang. Máy kiểm tra này phù hợp với khẩu trang y tế và khẩu trang bảo hộ hàng ngày.

Introduction
The PN-MRTF mask breathability tester is designed according to GB / T 32610-2016 and is used to test the inhalation resistance and exhalation resistance of the mask. This tester is suitable for medical and daily protective masks. Test principle: By wearing a protective mask on the head model of the simulator, and using the air pump to simulate the breathing action of the human body, the value of the pressure change of the pipeline caused by the obstruction of the air flow by the protective mask is tested to judge whether the breathability of the mask is qualified.
The tester has two test modes: inhalation resistance and breathing resistance
Inspiratory resistance test:
Turn on the power of the tester, switch the breathing direction to the inhalation position, press the "inhalation" button, adjust the air flow adjustment knob, when it rises to (85 ± 1) L / min, the inhalation pressure is 0 at this time. Put the sample on the head mold, adjust the wearing position of the sample and the tightness of the headband to ensure the tight fit of the mask and the head mold. Then adjust the air flow adjustment knob. When it rises to (85 ± 1) L / min, record the inspiratory resistance value at this moment, and press the "Stop" key to stop the test. During the test, take appropriate measures to avoid the specimen from attaching to the mouth of the breathing tube.
Exhalation resistance test:
Turn on the power of the tester, switch the breathing direction to the exhalation position, press the "exhalation" button, adjust the air flow knob, when it rises to (85 ± 1) L / min, the exhalation pressure is 0 at this time. Put the sample on the head mold, adjust the wearing position of the sample and the tightness of the headband to ensure the tight fit of the mask and the head mold. Then adjust the air flow adjustment knob. When it rises to (85 ± 1) L / min, record the exhalation resistance value at this moment, and press the "Stop" key to stop the test. During the test, take appropriate measures to avoid the specimen from attaching to the mouth of the breathing tube.
Technical parameter
Power supply: AC220V±10% 10A 50Hz；
Flow meter: (10～100)L/min，accuracy:3%；
Micro pressure sensor range:±1500Pa；accuracy:1Pa
Air supply: ＞100L/min；
Ventilation: (85±1)L/min；
Head model size: Big, mid, samll, size according to GB/T 32610-2016 appendix B5.5；
Display: 7” touch screen；
Print: Modular integrated thermal printer；
Communication output: RS232 (standard) / USB (optional);
Working environment: indoor temperature (20 ± 10) ℃; relative humidity <85%;
Dimensions: 420 × 600 × 720 (L × W × H)
Product features
Adopt new module circuit design, with WIFI IOT function. After the network is connected, the test results can be saved to the cloud server, and the special QMS quality management system can be used to query and generate reports;
Easy to switch between inhalation resistance and breathing resistance;
Use DGUS color touch screen as the man-machine interface;
With statistical functions, it displays the average, maximum, minimum, standard deviation and coefficient of variation.

National standard
GB / T 32610-2016 "Technical Specifications for Daily Protective Masks
GB 2626-2019 "Respiratory Protection Self-priming Filter Anti-Particle Respirator

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Máy kiểm tra số lượng sợi YCB:001

Hãng sx: Wira Instrumentation

Được thiết kế đặc biệt để kiểm tra số lượng sợi Thiết bị đo chính xác để xác định mật độ tuyến tính của sợi. Cân đếm sợi Wira là thiết bị lý tưởng để kiểm tra phân tích số lượng sợi. Các phép đo có thể xác định mật độ tuyến tính (khối lượng trên chiều dài) của các cuộn sợi và GSM (khối lượng trên mét vuông) của vải. Cân đếm sợi Wira đưa ra kết quả theo hệ thống Tex, dTex và các hệ thống đếm sợi khác như hệ mét (Nm), hệ Anh (Ne), hệ bông Anh (Nec), Denier (Td), v.v.

Liên hệ

Chi tiêt Xem nhanh

Máy đo độ căng của sợi dọc trong quá trình dệt - WARP TENSION METER

Hãng sx: Wira Instrumentation

Đo nhanh độ căng của sợi dọc trong quá trình dệt Máy đo độ căng sợi dọc WTM:003 nhỏ gọn được phát triển để đo lực kéo trong sợi dọc. Lực kết hợp của sợi dọc có chiều rộng 50 mm được đo bằng đầu đo có con lăn 100 mm. Kết quả được hiển thị trên một thiết bị hiển thị riêng. Người vận hành có thể cài đặt lưu trữ các giá trị độ căng AVG, LAST, MIN, MAX, PEAK-MIN, PEAK-MAX trong thời gian đo.

Liên hệ

Chi tiêt Xem nhanh

MÁY ĐO ĐỘ MỊN SỢI FFM:ELE2

Hãng sx: Wira Instrumentation

FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier. An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.

Liên hệ

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ