Máy kiểm tra độ thoáng khí của khẩu trang PN-MBT2F

Lượt xem:
182
Thương hiệu:
Pnshar - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra độ thoáng khí của khẩu trang y tế PN-MBT2F được thiết kế theo tiêu chuẩn YY0469-2011 "Yêu cầu kỹ thuật đối với khẩu trang phẫu thuật y tế".

Introduction
The PN-MBT2F medical mask Mask Breathablity tester is designed according to YY0469-2011 "Technical Requirements for Medical Surgical Masks".
Working principle: When letting different flow of air flow through a certain area of the mask, measure the pressure at both ends of the mask to determine the breathablity of the mask. It is suitable for medical device inspection institutions, medical surgical mask producer and related research departments.
Technical parameter
Power supply: AC220V±10% 10A 50Hz；
Flow meter: (1～10)L/min；
Micro pressure sensor range：0～100Pa；Resolution：0.1Pa
Air supply: ＞10L/min；
Ventilation: (8±1）L/min；
Display: 7”touch screen；
Print output: modular integrated thermal printer;
Communication output: RS232 (standard) / USB (optional);

Product features
Adopt new module circuit design, with WIFI IOT function. After the network is connected, the test results can be saved to the cloud server, and the special QMS quality management system can be used to query and generate reports;
The self-locking device is convenient and stable to use;
Use DGUS color touch screen as the man-machine interface;
With statistical functions, it displays the average, maximum, minimum, standard deviation and coefficient of variation.
National standard
YY/T0969-2013 《Disposable Medical Mask》
YY0469-2011 《Medical surgical mask》

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ

Chi tiêt Xem nhanh

HT-Steamer H-TS-3

Hãng sx: RAPID (Labortex)

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature, humidity, dwelling time.

Liên hệ

Chi tiêt Xem nhanh

Máy rửa liên tục LAB WASHER

Hãng sx: RAPID (Labortex)

LAB WASHER phòng thí nghiệm, chủ yếu là 4 bể là thiết kế chính, có thể được sử dụng trong hoạt động của một máy hoặc kết hợp máy cán, hút, hấp và nhuộm liên tục PS-J hoặc PS-JS.

Liên hệ