Máy kiểm tra độ bền bánh xe và chân đế GT-LB09

Lượt xem:
231
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

Nhà sản xuất và cung cấp máy kiểm tra ghế GESTER

Product Detail

Caster and Base Durability Testing Machine GT-LB09

Product Introduction

Application:

This Chair Testing Machine applies to pedestal base chairs with casters or chairs with legs and casters, to evaluate the ability of the casters , chair frame or chair base to withstand fatigue stresses and wear caused by moving the chair back and forth.

Feature:

The Caster & Chair Base Durability Tester frame is made of high quality aluminum,Beautiful and generous.
The Obstacle block can be disassembled freely, which is convenient to switch the test mode.
The test table is provided with a safety guard fence to prevent harm in the process of testing.
weight could be add up to seat load, which is easy to operate.

Standards:

ANSI/BIFMA X5.1-2011 Section 17,

QB/T 2280-2007 Section 6.6.7

EN 1728-2012 Section 6.29 method 2, 7.13 method 2

EN1335-3 -2009 Section 7.3.5 method 2

Key Specifications

Model	GT-LB09
Control System	PLC touch screen
Load weights	102kg(225Lb)~113kg(250Lb)
Moving stroke	1 000 ± 250 mm
Obstacle block	Width: 51mm Thickness: 3.2mm 3 pieces, removable
Driving method	Air Cylinder
Air source	6kgf / cm2 or more stable Air supply
Test speed	10±2 times/min
Testing times	0~999999 times, settable
Dimension(W×D×H)	200×120×130 cm
Power supply	1∮ AC 220V 50Hz 5A

Applications Industry

All kinds of chair products can be tested on the Caster and Base Durability Testing Machine

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ

Chi tiêt Xem nhanh

HT-Steamer H-TS-3

Hãng sx: RAPID (Labortex)

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature, humidity, dwelling time.

Liên hệ

Chi tiêt Xem nhanh

Máy rửa liên tục LAB WASHER

Hãng sx: RAPID (Labortex)

LAB WASHER phòng thí nghiệm, chủ yếu là 4 bể là thiết kế chính, có thể được sử dụng trong hoạt động của một máy hoặc kết hợp máy cán, hút, hấp và nhuộm liên tục PS-J hoặc PS-JS.

Liên hệ