Máy tạo tạo sóng thí nghiệm theo chiều dọc CMT

Code. 100613

For the preparation of corrugates samples for CMT and CCT tests
Tiêu chuẩn: ISO 7263, DIN-EN ISO 7263, TAPPI T809, SCAN P27, PAPTAC D29, etc.

Thông số kỹ thuật:
• Energy optimized due to its excellent design. Power consumption only 200w instead of the approximately 2.000w that consume the horizontal machines.
• Heating system. Directly heated rifle plates. The heating is built into the riffle
segments. Therefore heat transmission is very efficient and uniform. The
instrument takes approximately 15 minutes until the working temperature of
175ºC is reached. The temperature can be set accurately to 1ºC.
• Test samples are introduced from above.
• Standard delivery with a fixed set of “A” riffle segments. It can be optionally
ordered with one or more exchangeable sets of riffle segments. Flute A, B and
C are available (others on request). Changing the riffle plates is very easy and
only takes about 2 minutes.
• Distance between teeth: 8.5 ± 0.05 mm.
• Height of teeth: 4.75 ± 0.05 mm.
• Contact pressure of the riffle segments: 100 ± 10N.
• Rotational speed of riffle segments: 4.5± 1rpm.
• “Third Hand” for correct application of adhesive tape is included in delivery (10
flutes of approx.19mm length and 3 ± 0.1mm height).
• The instrument is optionally available with a double sample inlet for samples of
12.7 mm and samples of 15 mm (according to GOST standard). Consult your
provider.
• CE mark

TEST DESCRIPTION :
A sample of 6 x ½” (152 x 12.7 mm) is prepared by means of a sample punch. It is inserted into the sample inlet at the top of the instrument. When the start button is pressed, it is introduced and molded by the heated riffle plates. The sample is then ejected from below and can be taken out. The riffle plates return
to their initial position. It is important that the sample has the correct width of 12.7 mm
Nguồn điện: 110 – 220v, 50 – 60Hz
Kích thước: 480 x 200 x 360 mm (WxLxH)
Trọng lượng: 20 Kg