MIT Folding Endurance Tester QC-104H

Confirm to TAPPI T423PM , ASTM D2176 , JIS P8115 ,GB/T 2679.5 , ISO 5626 Standard

MIT Folding Endurance Tester is for testing the material's folding endurance strength, the machine can test the available bending times when the material bear the tension and bending angle (from +135 degree to -135 degree normally). The common test material includes aluminum foil, copper foil, paper, ductile circuit board and so on. QC-104A can also support the bending time test for conductive break circuit material and measure the times sample bend and break. QC-104A is equipped with 5" touch screen which can support bending speed, bending times and estimated test period. The machine will auto stop and display the test times while detecting the break or unable to conduct electricity of the sample.

Industry: Paper, Electron

Specification:

Test Speed: 175± 5 CPM(standard) or specified (20~200 CPM)

Test Angle: Standard ±135°±5°, ±90°±3° (please specified in advanced) or customize

Gap Between Grips: 70 mm

Grip Interval (T):  0.25 / 0.5 / 0.75 / 1.0 / 1.25 mm (able choose one type)

Angle Radius (R): 0.38 / 0.5 / 0.8 / 1.0 / 2.0 / 3.5 (able choose one type); attached 0.8 as standard accessory.

Weight: 50g, 100g, 200g, 300g, 500g, 1000g (each weight for one)

Counter: 0~99,999,999 times to reach auto stop

Dimension: 63 × 44 × 46 cm

Machine Weight: 50 kg

Power: Single Phase 110~240V