AUTOMATIC INTERNAL BOND TESTER IBT-10A

Price: 0 VND

Manufacturer: PTA Goup

Quantity:

Code. 080102
For determining the internal bonding of paper and board
Standard : TAPPI T569, T833

CHARACTERISTICS :
Microprocessor controlled.
Control panel with 4 buttons and an alphanumerical display of liquid crystal glass
Easy and intuitive operation of the control menu.
Selection of work units : ft.lb/sq.in, mJ/sq.in and J/m2
Full statistics functions over 20 values.
Three measure ranges with exchangeable pendulums.
Reading resolution of 0,001 ft.lb (accuracy <1%).
Steel robust frame designed to avoid energy losses during test.
CE mark.
Bubble level for equipment levelling.
Automatic equipment calibration (Automatic zero).
Automatic pendulum release. To avoid differences between operators.
Pneumatic fixing of the sample holder and returning of the pendulum to initial position.
RS-232 connection.
Possibility to complete the equipment with manual or automatic preparation station, IBP-5M or IBP-5A. Consult your provider

TEST DESCRIPTION :
In order to minimize variations in the test results, the sample preparation mustbe done with a maximum care, to achieve the most homogenous results. Optionally, the equipment can be completed with the preparation station (IBP-5M or IBP-5A)

By means of the sample preparation station, 5 samples must be prepared. Now, a sample must be placed in the test position. The Test button is pushed (in this moment, the sample holder is fixed pneumatically). The pendulum is released automatically, minimizing this way the possible difference between operators. Once the sample is tested, the pendulum returns to the initial position. The display will show the result achieved in the
last test and the mean value and standard deviation of the test series. To carry out a new test, the tested sample holder is removed, placing a new one. The test process will be repeated again.

MEASUREMENT RANGES :

ibt10a sub