Soluble Salt Meter (SSM)

Soluble Salt Meter (SSM)
A new inspection tool has been developed to replace the Bresle patch method for soluble salt determination. This Soluble Salt Meter (SSM), for which United States Patent No. 8,252,600 was issued on August 28 2012, was designed around the current Bresle patch salt inspection method. The SSM test protocol exactly duplicates the Bresle process, except that measurements are automated and there are no consumables. The complete test sequence requires only one minute. The SSM is approved as an authorized alternative to the Bresle patch method.

Specifications

• Standards Equivalent to ISO Standard 8502-9 (Field method for the
• conductometric determination of water-soluble salts; The
• Bresle method) in accordance with NACE SP0508-2008.
• Measurement Area 1250 mm (circular) fixed footprint
• Attachment Method Magnetic with silicone seal (no effect on surface quality;
• proven to seal over deep pits)
• Water Injection Method Automated, with simple press of fixed volume dispenser
• Dose 3 ± 0.05 ml
• Measurement Process Steps 5
• Total Process Time 60 seconds (measurement to measurement)
• Measurement Range 0-100 µS/cm
• Resolution 1 µS/cm
• Measurement Accuracy ± 3 µS/cm
• Surface Temperature Range 5 - 50 °C (41 - 122 °F)
• Temperature probe accuracy ± 0,3 °C (± 0,54 °F)
• Diameter of curvature: - Standard measuring head >= 44 inch / 1100mm
• - Measuring head 1 26 <=> 42 inch / 650 <=> 1050mm
• - Measuring head 2 14 <=> 24 inch / 350 <=> 600 mm
• - Measuring head 3 8 <=> 12 inch / 200 <=> 300 mm
• Readout µS/cm or mg/m2
• Memory Holds up to 1000 measurements (10 batches of up to 100
• measurements each)
• Connectivity via USB with PC or laptop
• Power Supply Lithium-ion rechargeable battery
• IP Rating IP54
• Dimensions (Instrument only) 21 x 10 x 8 cm
• Weight ( Instrument only ) 780 gr