Máy đo độ bền kéo QC-508M1F

Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard

One column type has a better design of the machine volumn and and operation. The machine adopt servo motor and high precise ball screw. QC-508M1F is suitable for the test force below 2kN. User can base on the specimen length and elongation to choose the machine stroke. We can provide complete planning for grips to test with different test methods.The dedicated software for M1F can be installed under Windows7/8/10, it is avaliable for tensile, compression, bending, peeling, constant tensile or compression tests and so on. The software is quite user friendly and easy to learn, it can support different unit(imperial or metric), real-time curve graph display and provide complete data analysis function. All the report can be adjust, full analysis or save after finish the test. User can choose the optional display for stand alone operation to have a quick test.

Industry: Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electric, Package, Medical, Construction

Specification:

- Max. Capacity: 2 kN

- Units Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

- Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

- Force Resolution: 1/50,000 (31 bits)

- Load cell accuracy: ±1% under the range 2-100% of the load cell capacity

(There are optional load cells with higher accuracy)

- Test Stroke(w/o grip): 1100mm

- Stroke Resolution: 0.0001 mm

- Cantilever Distance: 70mm

- Speed Range: 0.2 ~ 1000mm/min (digital type setting)

- Speed Accuracy: ±1%

- PC-Port: RJ45(TCP/IP)

- Data Sampling Rate: Max.400Hz

- Motor Type: Servo Motor

- Feature

※Force, displacement, time, stress, and strain display in real time

※The calibration parameter is recorded automatically in the loadcell. When it is replaced, no adjustment is required.

※The displacement sensor can be recognized by the controller automatically. When it is replaced, no complicated setting is required.

※User-friendly test settings: moving direction, force/displacement zeroed automatically, test speed, pause are adjustable.

※Automatic return after the test

※Machine protection by force, time, displacement, etc.

※The jog precisely controls displacement.

※Optional display is available for stand-alone mode.

- Power Supply: Single Phase, 200 ~ 240VAC，5A

- Dimension: 50× 53 × 175 cm

- Weight: 100 kgf