Computerized Tensile (compression) QC-548M1F-M

Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard

One column type has a better design of the machine volumn and and operation. The machine adopt servo motor and high precise ball screw. QC-548M1F is suitable for the test force below 5kN. User can base on the specimen length and elongation to choose the machine stroke. We can provide complete planning for grips to test with different test methods.The dedicated software for M1F can be installed under Windows7/8/10, it is avaliable for tensile, compression, bending, peeling, constant tensile or compression tests and so on. The software is quite user friendly and easy to learn, it can support different unit(imperial or metric), real-time curve graph display and provide complete data analysis function. All the report can be adjust, full analysis or save after finish the test. User can choose the optional display for stand alone operation to have a quick test. Industry:Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electric, Package, Medical, Construction.

Specification:

Max. Capacit:  5 kN

Units   Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

Force Resolution: 1/50,000 (31 bits)

Load cell accuracy: ±1% under the range 2-100% of the load cell capacity

(There are optional load cells with higher accuracy)

Test Stroke(w/o grip): 800 mm

Stroke Resolution: 0.0001 mm

Speed Range: 0.2 ~ 2000mm/min (digital type setting)

Speed Accuracy: ±1%

Data Sampling Rate: Max.400Hz

Space Between Columns: 80 mm

PC-Port: RJ45(TCP/IP)

Motor Type: Servo Motor

Frame Stiffness: 4.1 kN/mm

Power Supply: Single Phase, 200 ~ 240VAC，5A

Dimension: 50X50X145cm

Weight: 80 kgf