Confirm to ISO 12048, ISO 2872, ASTM D4169,TAPPI T804,GB T4857-4, JIS-Z-0403-2, ASTM D642, GBIT 16491, DIN 55440-1 Standard
QC-121M2F tests the compression capacity of large packaging material such as cartons, foams or styrofoam, etc. The tester simulates a testing condition similar to logistics and storaging industry in which cartons are applied to measure its capacity and deformation against compression. QC-121M2F measures the accurate force using evenly distributed sensors; the upper platen can be fixed or versatile depending on test requirement. The software is capable of several testing patterns such as basic compression, constant load compression and repeating compression for times. The test results are precisely and instantly presented by distinct analysis and test graph.
Industry:Paper, Food, Beverage, Package
Specification:
Test space: 120×120×120 cm
Max. capacity: 2000kg (20kN)
Upper platen type: Movable and fixed. Users can make adjustment themselves
Units Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force resolution: 1/100,000 (31 bits)
Load cell accuracy: ± 1% (within range 5 ~ 100% load cell capacity)
Stroke resolution: 0.0001mm
Speed range: 0.015 ~ 300mm/min
Speed accuracy: ± 1%
PC-port: RJ45 (TCP/IP)
Data sampling rate: Max. 1200 Hz
Motor type: Servo motor
Hardware safety protection: Upper limit, lower limit, emergency stop
Power supply: Single phase 200 ~ 240VAC,5A
Dimension: (WxDxH) 182×120×195cm
Weight: 900 kg