Box Compression tester

Confirm to ISO 12048、ISO 2872、ASTM D4169、TAPPI T804、GB T4857-4、 JIS-Z-0403-2、ASTM D642、GBIT 16491、DIN 55440-1 Standard

QC-121D2 is used for testing strength of large packing materials, such as carton, foam, Styrofoam, etc. It simulates how boxes react under large force, which is a important test in Logistics/Warehouse management. QC-121 has multiple sensors so that it can provide test results that is closer to real situation; Upper compression platen can switch between U-joint or Fixed platen, allowing users to adjust base on their needs. Display on the the controller can analyze basic test data, and show graph. If users want to output test report, store test data, or do advance analyze, we also has a optional software to go along with.

Specification:

Test space: 120×120×120 cm

Max. capacity: 2000kg (20kN)

Platen type: Fixed/U-joint, adjustable.

Units   Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

Load resolution: 1/10,000 (23 bits)

Load cell accuracy: ± 1% (within range 5 ~ 100% load cell capacity)

Displacement resolution: 0.00125mm

Speed range: 2 ~ 200mm/min

Speed accuracy: ±1%

PC-port: RJ45 (TCP/IP)

Data sampling rate: Max. 1200 Hz

Motor type: DC motor

Hardware safety protection: Upper/Lower limit, Emergency stop button

Power supply:Single Phase200 ~ 240VAC，5A