Motor Type Roller QC-803H

Confirm to JIS-C2107、Z0237、PSTC7、ASTM D3330、ASTM D1000 Standard

The tape peeling test sample is made by a standard rubber roller. The tape is rolled and pasted on the steel plate or a specific material base. By sticking manually is difficult to be consistent and has larger chance to affect the test result.If you use motor type roller to make samples, you can ensure the consistency and stability of the pasting.QC-803H operation interface adopts 5-inch electrofusion touch screen,simple and clear to operate.Rolling speed can be set arbitrarily between 50~1200 mm/min. It can also set up to 99 times of back-and-forth rolling and pasting and up to 300mm pasting distance.

Specification:

Weight of roller: 4.5 lb (two rollers can be used at the same time)

Material: Outer covering 80° ±5°(Shore A) , rubber coating 6 mm

Speed of roller: 50 ~ 1200 mm/min (Stepless setting)

Stroke: Screen touch settings

Width of Roller: 45 ± 1.5 mm

Diameter of Roller: 97 ± 2.5 mm

Power: Single phase，110 ~ 240V

Dimension: 580 X 350 X 280 mm

Weight : 33 kgf