DIN Abrasion Tester QC-618A

Confirm to DIN53516 ISO-4649 GB/T 9867 SATRA TM174 Standard

QC-618A is suitable for elastic material, rubber, tires, conveyor belts, transmission belts, shoe soles and software synthetic leather. The specimen of wear area is dia. 16mm which provide the required load and the specimen press on the sand paper wheel. The sand paper #60 will be stick on 150mm of drum. The drum turns one rotary, the specimen will move 4.2mm. The drum is 40rpm rotated speed. When the specimen of wear distance reaches 40M, it will be stop and measure after wear of volume of losses which was base on abrasion characteristics.

Industry: Rubber, Plastic

Specification:

Sample size: Diameter 16mm, height 6~16mm

Weight sets: 2.5N、5N(test load 2.5N、5N、7.5N、10N)

Drum: Diameter150 mm, Perimeter 471mm, Rotary speed 40PRM

Sand paper: #60 or indicated

Accessories: Sand paper, standard rubber, specimen cutter, Aluminum pre-rub (1 pc),

brass brush (1 pc) and driller(1 pc)

Sample movement: 4.2 mm / rev

Stroke: 40 m

Sample Tilt angle: 3°

Power  Single phase: 100- 240V

Dimension: 81 × 32 × 36 cm

Weight: 90 kg